What snow and wind loads are your buildings built for?
The short answer
Our structures are framed for Colorado conditions — steep-shedding roof profiles, upgraded framing for high snow-load areas, and anchoring for wind uplift. Exact design loads depend on the model and your address, because requirements change sharply with elevation. The framing details behind those ratings are in how to determine a quality shed.
Colorado is not one climate. A building on the Pueblo plains and a building at 9,000 feet in Park County face very different loads, and code recognizes that. Two numbers drive the framing: your ground snow load and your design wind speed — both set by jurisdiction and elevation.
How we build for it
- Roof profiles that shed — A-frame and steeper pitches move snow off instead of holding it.
- Upgraded framing for high snow-load areas: tighter rafter and truss spacing and heavier members where required.
- Anchoring details for uplift, which matters as much as snow on exposed plains and ridgelines.
- Quality sheathing and fastening, because uplift failures usually start at connections.
Why we ask for your address
Snow-load requirements can more than double over a short drive up in elevation. Give us the address rather than just the county and we will confirm the design loads your jurisdiction applies and what framing package your model needs to meet them — including a stamped engineered set if required.
Owner habit that pays off
After a heavy, wet storm, clear drifted snow away from walls and doors and keep the roof clear of ice dams. It protects paint, doors, and framing.
How The Shed Yard helps
We are Colorado builders serving Colorado weather. Tell us where the building is going and we will spec it correctly. See our warranty terms and the 1/1/5 shell and garage warranty.